SHEARED/EDGED & TRUE FLAT BARS
RHS Stainless offers a complete range of stainless flat bar. Flat bar is typically used by fabricators and manufacturers making a variety of products for many different industries and applications around the world.
SHEARED/EDGED T304/304L T316/316L
Size Range:
Thickness Range: .125” — .500”
Width Range: .500” – 12.00”
Length: 12’ (custom lengths available)
Finish: Mill Finish
TRUE FLAT BAR T304/304L T316/316L
Size Range:
Thickness Range: .125” – 3.00”
Width Range: .500” – 4.00”
Length: 12’
Finish: HRAP
Grade 303 (AISI 303)
Grade 303 or the UNS S30300 stainless steel bar, is free machining steel. Its impressive corrosion resistance and great machinability makes it one of the most used free machining stainless steels obtainable. UNS S30300 or Grade 303 is extensively used in different products starting from general machining like screw etc. Grade 303 is not responsive to heat treatment, but its impressive toughness is admirable just as with all the other austenitic grades.
Grade 303 is used in the following Industries:
- All-Purpose Machining
- Screw Machining
Products manufactured using Grade 303 are:
- Bushings
- Aircraft Fittings
- Nuts & Bolts
- Screws
- Gears
Grade 304/304L
Grade 304/304L or UNS S30403 as it’s called technically, in general is preferred due to the fact that it is the low carbon content variant of Type 304 and because it is “free machining” variant. The Grade 304/304L comes with immense blend of corrosion resistance, strength and fabricibility, which makes it suitable for almost in all types of industries. The Grade 304/304L also is unresponsive to heat treatments, but the strength and hardness could be increased using cold working.
Grade 304/304L is used in almost every Industry
Products manufactured using Grade 304/304L are:
- Architectural Railings
- Chemical Containers, Even For Transport
- Kitchen Benches & Sinks Troughs
- Woven/Elded Screens
- Food Processing Equipment
- Threaded Fastener
- Springs
- Equipment & Appliances
- Paneling & Trim
Grade 316/316L
Grade 316/316L also called as Grade 316 and UNS S31600 is an austenitic stainless steel which has chromium, molybdenum and nickel as its major alloying elements. Molybdenum (is not present in stainless steel Grade 304) addition is helpful for Grade 316/316L’s increased resistance in chloride environments and salt water. Grade 316/316L gives quite good creep resistance in high temperatures and it has better strength in comparison to stainless steel 304.
Grade 316/316L is used in the following Industries:
- Chemical
- Architectural
- Mining & Marine
- Pharmaceutical
- Petroleum
- Textile
- Pulp & Paper
- Water Filtration
- Transportation
Products manufactured using Grade 316/316L are:
- Compression Fittings
- Ball Valves
- Hardware
- Flanges
- Hose Fittings
- Heat Exchangers
- Lab Benches
- Jewelry
- Lab Gear
- Strainers & Springs
- Threaded Fasteners
- Pressure RED Valves
Grade 416
Grade 416, also called UNS S41600 is a Martensitic grade of stainless steel. The Martensitic stainless steels have been manufactured as an alloy, which could be toughened using heat treatment and it also will be corrosion resistant, though it is not as resistive to corrosion as the ferritic or austenitic stainless steels. Stainless Steel 416 has respectable wear resistant, and is magnetic; it also is highly machinable. Its other qualities include: non-galling and non-seizing properties, sensible strength in hardened and tempered state and resistance to gently corrosive surroundings. Generally it’s ordered in T (tempered), H (hardened) and A (annealed) conditions.
Grade 416 is used in the following Industries:
- Electrical Motor
- Nut & Bolt
- Gear
- Pump
- Valve
Products manufactured using Grade 416 are:
- Axels
- Fasteners
- Bolts
- Motor Shafts
- Gears
- Pinions
- Nuts
- Machine Parts
- Pump Shafts
- Studs
- Appliance Parts
- Valve Parts